Click here to print this page

To see the animated tutorial visit:





Skill Level & Time to Complete

  It varies depending on the size of the house and the number of people working. For a typical ranch house, consider the following estimates as a starting point:
  • Beginner - 4 to 5 hours 
  • Intermediate - 3 to 4 hours
  • Advanced - 2 to 3 hours
  - Don’t go back over a freshly-caulked area until the caulk has had a chance to cure.
  - Remove all old caulk and make sure the surface where you apply the new caulk is clean and dry.


Materials List
   Appropriate caulk (in cartridges)
   Rags and/or paper towels
Tools List
   Step ladder
   Extension ladder
   Caulk gun
   Work gloves


1. There are two factors to consider in choosing caulk. The first is how the caulk is designed to be used. Generally, any brand of exterior silicone caulk will give excellent results. Don’t use interior-grade products for outside applications. The second factor is the warranty. The longer the warranty period of the caulk, the better quality it is. Higher quality caulk will seal better and stay more flexible, and is worth the extra cost.
2. To load the caulk gun, use your thumb to press the release on the rear of the gun, and pull the plunger all the way back. Slip the cartridge into the gun and push the plunger in snugly. Take your thumb off the release.
3. Cut the end of the nozzle on the cartridge so the opening matches the size of the gap or seam you’re sealing. Then use a screwdriver or length of stiff wire to puncture any inner seal in the cartridge.
4. Place the nozzle at a 45° angle to the seam being sealed. Gently squeeze the handle of the caulk gun and draw the gun backwards, toward yourself. It takes just a little practice to match the pressure on the handle and the speed at which you move the gun to get a smooth, even flow. When you can’t squeeze the handle any more, release it and it will spring back out, ready for you to continue. Caulk may flow more quickly at the end of each squeeze, so take care you don’t get a “blob” all at once. Caulk will also continue to flow a little more evenly when you release pressure on the handle; wipe up any extra with a rag or paper towel.
5. There’s no need to flatten or shape the bead of caulk to get it to look concave, or depressed. When the caulk is first applied, the bead is convex; as it cures, it will shrink slightly and form a concave seal.


6. To seal an especially large or deep gap or seam, you will need more than just caulk. You shouldn’t “fill” a large gap with caulk. Instead, place some other filler material in the opening, such as wood, fabric, paper, insulation or even rope, until the opening can be sealed at the surface.
7. Areas to be caulked include 1) where siding meets doors and windows, 2) along house trim, 3) at corners of the house, 4) around outside faucets and dryer vents, and 5) where the siding meets the foundation.

For new construction, or if you’ve installed replacement windows or doors, you’ll want to caulk between the window- or door-frame and the wall studs, before you put the siding (back) on.

Now enjoy your newly weatherproofed home!

Copyright© 2001-2006, Inc. All rights reserved.